serk118uk's Native Application & Ports: AROS FORUMS

serk118uk's Native Application & Ports

Last updated on 19 days ago

serk118ukSoftware Dev

Posted 19 days ago

@AMIGASYSTEM

Hi Carlo,

I need a few files and two quick answers.

Please run the **debug build (attached here)** (YAM.debug), reproduce both problems, and
send me:

1. **PROGDIR:yam_native.log/ imap log ** (the whole file).
YAM.debug writes this automatically. It is flushed per line, so it
survives a crash.

2. **The full AROS alert output.**
save the log if you can.

3. **YAM/.config *after* you tried to add the IMAP account.**
The decisive check for me is whether the file contains these two lines:



 IMAP00.User = ...

 IMAP00.Password = ...

4. **YAM/.folders** and, if one exists, the IMAP-bound folder's
YAM/Folders/IMAP_*/.fconfig.

5. Two quick questions:
- Does **POP3** work on that same machine with the same account and the
same App Password? (This tells me whether it is a credentials problem or
an IMAP save/load problem.)
- What exactly did you type for **Server / Port / Security / Username /
Password**, and did you press **Save** in the Config window?

If you can, also enable a bit more logging before reproducing. In
S:User-Startup add:



SetEnv yamdebug "@net @error @always @config @gui file:SYS:Tools/yam/yam_native.log"

(adjust the path to where YAM actually runs), then reboot.

Finally, please note the **exact sequence** that produces the Guru, e.g.:



open Config -> TCP/IP -> IMAP -> + -> click Username -> type ... -> ...

It appears only on a specific step, so please try to crash YAM using .YAM.debug.

Thanks!

You do not have access to view attachments

serk118ukSoftware Dev

Posted 20 days ago

#19

Thanks for the log , you can edit .Config to add imap or other info.

AMIGASYSTEMDistro Maintainer

Posted 20 days ago

#18

Thanks, I'll try it right away (AMP2 Is Unregistered !). Anyway, MPEG works perfectly.
As for YAM IMAP, it doesn't save; you get a configuration error for the username and password.

For the Guru, this is rare and unpredictable. Here's the error message:
*** Logged alert:
Program failed
Task : 0x000000004A04B980 - YAM
Error: 0x00080000 - Unknown CPU error
PC : 0x000000004AD055A6
Module YAM Segment 1 .text (0x000000004ABCFAD0) Offset 0x0000000000135AD6

Disassembly:

0x0000000000000000 ******************************** <illegal address>
*** Logged alert:
Program failed
Task : 0x000000004A04B980 - YAM
Error: 0x00080000 - Unknown CPU error
PC : 0x000000004AD055A6
Module YAM Segment 1 .text (0x000000004ABCFAD0) Offset 0x0000000000135AD6

AROS One All Thread
AROS One Home Site
AROS One Facebook

serk118ukSoftware Dev

Posted 20 days ago

#17

I download AMP2 while learning about videoplayer tricks/hints to carry into arVIDEO and i forgotten about amp2 port for aros.
AMP2 Ported to AROS x86_64 , but i dont actually know how stable, i run few tests and played .mpg and .avi/.qt and other supported video formats, i have no plan to do any other works on AMP2.
Grab and test if you like..
https://github.co...ROS-x86_64

serk118ukSoftware Dev

Posted 22 days ago

#16

Carlo you can leave Amitranslate out for now , I want to focus on YAM atm

deadwoodAROS Dev

Posted 22 days ago

#15

Thanks for the patch. I'll review and integrate it in a few days.

serk118ukSoftware Dev

Posted 22 days ago

#14

AMIGASYSTEM wrote:

@AMIGASYSTEM - Okay, I'll run some tests. The Guru doesn't show up very often; I've encountered it when changing my password.
As for Amitranslate, if there aren't any improvements, I'll remove it from the next AROS One 64-bit v11.

TheBar.mcc and TheBar.mcc, you can create the patch and post the updated versions of TheBar.mcc and TheBar.mcc; I don't want to make any mistakes.

Patch for deadwood, what's crashing, do you have sashimi output for me? BTW you can use imap too, I want YAM stable if you could help me with sashimi output, on my side I don't get any guru to fix whats crashing YAM.

AMIGASYSTEMDistro Maintainer

Posted 22 days ago

#13

Okay, I'll run some tests. The Guru doesn't show up very often; I've encountered it when changing my password.
As for Amitranslate, if there aren't any improvements, I'll remove it from the next AROS One 64-bit v11.

TheBar.mcc and TheBar.mcc, you can create the patch and post the updated versions of TheBar.mcc and TheBar.mcc; I don't want to make any mistakes.

AROS One All Thread
AROS One Home Site
AROS One Facebook

serk118ukSoftware Dev

Posted 22 days ago

#12

Mean time I updated GLFW and Raylib to todays latest versions , i will upload and refresh aros-archives..

1 user reacted to this post

deadwood

serk118ukSoftware Dev

Posted 22 days ago

#11

if no guru than good to apply patch file which is included in thebarfix.zip

serk118ukSoftware Dev

Posted 22 days ago

#10

@@AMIGASYSTEM

Attached fixed classes , please backup yours and copy fixed ones, if guru dont appear than i am also attaching patch file here for deadwood,

Edited by serk118uk on 29-09-2026 09:28, 22 days ago

You do not have access to view attachments

serk118ukSoftware Dev

Posted 22 days ago

AMIGASYSTEM wrote:

@AMIGASYSTEM - YAM works, even though a “Guru” error pops up every now and then! I tried sending and receiving emails (POP3 - SMTP).

Amitranslate keeps displaying the message shown in the previous screenshot, while Amifox only works if you enable “Use SSL=No” in Tooltypes.

YAM works , guru due to one of the class I already fixed , I will upload to you later on should fix no more guru

AMIGASYSTEMDistro Maintainer

Posted 22 days ago

YAM works, even though a “Guru” error pops up every now and then! I tried sending and receiving emails (POP3 - SMTP).

Amitranslate keeps displaying the message shown in the previous screenshot, while Amifox only works if you enable “Use SSL=No” in Tooltypes.

AROS One All Thread
AROS One Home Site
AROS One Facebook

You do not have access to view attachments

serk118ukSoftware Dev

Posted 23 days ago

YAM TESTING

Download at

https://filebin.net/h7khmdkki0lqtj1r
https://filebin.n...kki0lqtj1r

Use Installer so EVERYTHING done automatically for you

Do read aros read me to setup your mail account, do not activate both
POP3 and IMAP ,(both does work but for our test stick to one)

1st run will be slow plus a .log file will be created so take time let
YAM download ALL mails at 1st run.

If any issues please email back.

One zune class might be issue but lets see .

i already compiled and will submit fix patch to deadwood if test fails on zune class.
,
If yam crashes. I need the .log files and if guru appear use Sashimi >ram:yam_crashlog.txt and attach here email me please.

I also like to see success stories of your screen shoots if yam works for you.

1st run. Set for imap

Pop3

https://youtu.be/EtjenpJ75F8?feature=shared

Edited by serk118uk on 28-09-2026 12:48, 23 days ago

2 users reacted to this post

aha, coffeecat

serk118ukSoftware Dev

Posted 23 days ago

OlafSch wrote:

@OlafSch -
serk118uk wrote:
@serk118uk -
deadwood wrote:
@deadwood - Looking great!

One of my email accounts is now IMAP-only, so yes IMAP support would be welcomed as more users can be in the same situation. As to application (YAM or Simplemail) I don't have preference.

In that case i had to integrate simpleMail IMAP into YAM .

Possible to also compile it for Aros 68k?

Possibly yes but sorry 68k version has to wait until x86_64 version at dailly usage state..

serk118ukSoftware Dev

Posted 23 days ago

AMIGASYSTEM wrote:

@AMIGASYSTEM - @serk
After the update, AmiTranslator no longer works. I don't know if it's because of AmiSSL—see screenshot.

How can I check if AmiSSL is working? Is there a test command?

As soon as YAM is run, it goes to Guru

I tested Murks, and so far, no problems!

Carlo

Lets get YAM witt latest AMiSSL stable for everyday usage than i will check Amitranslator, looking at the screenshot , there is a problem with either your key file or my pascal coding needs to improve, tobe fair I am hoping ALBA to recompile every tool that uses AmiSSL again fo aros since we have latest AmiSSL.

OlafSchSenior Member

Posted 26 days ago

serk118uk wrote:

@serk118uk -
deadwood wrote:
@deadwood - Looking great!

One of my email accounts is now IMAP-only, so yes IMAP support would be welcomed as more users can be in the same situation. As to application (YAM or Simplemail) I don't have preference.

In that case i had to integrate simpleMail IMAP into YAM .

Possible to also compile it for Aros 68k?

OlafSchSenior Member

Posted 26 days ago

deadwood wrote:

@deadwood - Looking great!

One of my email accounts is now IMAP-only, so yes IMAP support would be welcomed as more users can be in the same situation. As to application (YAM or Simplemail) I don't have preference.

Today almost everyone uses different devices for accessing emails. IMAP is a must there for email clients

AMIGASYSTEMDistro Maintainer

Posted 26 days ago

@serk
After the update, AmiTranslator no longer works. I don't know if it's because of AmiSSL—see screenshot.

How can I check if AmiSSL is working? Is there a test command?

As soon as YAM is run, it goes to Guru

I tested Murks, and so far, no problems!

Edited by AMIGASYSTEM on 24-09-2026 19:31, 26 days ago

You do not have access to view attachments

deadwoodAROS Dev

Posted 27 days ago

Wow, nice work! Thank you

You can view all discussion threads in this forum.
You cannot start a new discussion thread in this forum.
You cannot reply in this discussion thread.
You cannot start on a poll in this forum.
You cannot upload attachments in this forum.
You cannot download attachments in this forum.

Moderator: Administrator, Moderators

Users who participated in discussion: serk118uk, deadwood, AMIGASYSTEM, Amiwell79, miker1264, OlafSch, Ilbarbax, Jeff1138, sonountaleban, ami-elvis, Bohun, coffeecat

Search AROSWorld

serk118uk's Native Application & Ports